Manually operated permanent magnet lifter specifically designed for lifting thin plate and removing single sheets from a stack.
Operating handle works like a car handbrake. A button on the end operates a safety catch which prevents accidental switching while a load is being held.
Simply attach the Ultralift TP to the hook of your crane or hoist and you're ready to go.
Permanent magnets and manual switching mean no operating costs.
A job that takes two men with hooks, chains or slings can be done with one hand using the Ultralift TP. No more struggles to attach heavy or awkward loads. No more worries about the stability of the load once it's lifted.
Loads can be stored and accessed more efficiently as you only need access to the load's top face to attach the Ultralift TP.
| Material Thickness 5mm | Material Thickness 6mm | Material Thickness 8mm | Material Thickness 10mm |
| SWL (kg) | SWL (kg) | SWL (kg) | SWL (kg) |
| 75 | 100 | 150 | 200 |
Maximum length of material: 1500mm. We supply spreader beams to ensure safer lifting on longer products. We also produce equipment to enable tilting of the load through 90 degrees
Please refer to table below for measurements
Technical Data
| |
| |
| Dimensions |
| Weight: | 8 kg (17.64 lb) |
| |
| Operating Data |
| Maximum Operating Temperature: | 80 °C (176.00 °F) |
| |
| Diagram Measurements |
| Measurement A: | 352 mm (13.86 ") |
| Measurement B: | 300 mm (11.81 ") |
| Measurement C: | 181 mm (7.13 ") |
| Measurement D: | 100 mm (3.94 ") |
| Measurement E: | 126 mm (4.96 ") |
| Measurement F: | 74 mm (2.91 ") |
| |
Food industry standard metal-detectable tools now available from our online shop site 
Company literature available as PDFs including the Product Catalogue, Micromag and Ultralift+