Neoquadrum

• A true milling chuck in every sense
• 2 different pole sizes
• 2 different powers for each pole size
• Maximum holding forces on material from 12mm thick and above
• Neoquadrum System is a magnetic grid made up of square poles, where "south" poles surround each "north" pole, and therefore an equal resistance can be offered to bi-directional forces
• Neoquadrum is a magnetic table, which in combination with simple mild steel tooling allows rapid and secure fixturing, of a wide range of work pieces
• Completely sealed chucks with no moving parts
• A split second of power is needed to activate / de-activate the chuck
• High impact epoxy resin and steel magnetic working surface
• Modular in design and can generally be grouped to a size to match your requirements
• Advanced control unit is supplied, which totally and rapidly switches the chuck and work piece within 1 second

Benefits of the Neoquadrum System

• Uniform Clamping
• Lack of vibration during cutting resulting in
  • Greater accuracy
  • Longer tool life
  • Increased federates
• Access to 5 sides of the workpiece without obstruction
• Non-stop machining
• Reduced programming time
• Quick component clamping and release
• No bespoke fixturing
• Maximum safety - fail safe operation
• Energy saving - No power is required or used during the work holding / machining phases
• No heat generation - no top plate deformation
• No loss of magnetic power over time

Controller

• Eclipse Magnetics Advanced Modular Electronic Controller.
• Supplied in a robust control unit rated to IP54.
• Suitable for Plc connection.
• Integral safety interlock.
• Incorporates UCS voltage sensor.
• Integral 20-amp thermo fuse.
• 415 Volts supply. (2 phase earth).
• This includes hand pendant.
• Features safety enable button.
• On / off switching.
• Indicates magnetic state of the chuck.
• Complete with 4 metres of flex for ease of use.