New Products
  • Power Matrix
    PRODUCTIMAGE: 
    power-matrix.gif

    The Ultimate Milling Chuck

    Increased productivity

    • Clamp at the push of a button
    • No manual clamps – non-stop machining
    • 5 face accesibility

    Safer Workholding

    • Consistent extreme clamping force
    • Failsafe – load stays held if power lost

    Higher Quality

    • Minimal vibration – improved part finish & longer tool life
    • No heat distortion – chuck does not heat up

    More...

Optimag Electronic

printable page
  • The Optimag E is available in a range of four sizes
  • This range is designed to clamp and lift thicker material (15mm and above dependent upon size)
  • Optimag E is a modular system where either one or multiple magnets can be controlled from a single controller
  • Additional magnets can be added to your system at a later date as required (until the maximum current rating of the controller is reached)
The control system offers the following as standard: -
  • Illuminated push buttons - indicate the magnetic state of the system
  • Remote switching facility - the controller can be interfaced to a PLC or operated by remote switches.
  • Output interlocks - confirm the magnetic state of the system to an automated cell.
  • Current sensing / safety circuit - the lights/interlocks will not operate if the magnet has not been fully magnetised.
  • Operating voltage - 240Vac
  • IP rating - IP55

The Optimag E has no moving parts so is maintenance free.

Lift in safety

The magnet material in the Optimag E is permanently magnetic. The electric current is only required to switch the Optimag E on or off. The Optimag, once energised or de-energised, will not change state unless it recives another signal. So if the electricity fails while a load is being held the load stays held. In addition, safety circuity indicates the status of the magnet to the user and to an automated cell, and can be used to stop machinery from operating until the magnets are fully magnetised.

PRODUCT RANGE

Product Diameter (mm) Height (mm) Maximum Pull Weight (kg)  
ESPM80C 80 55 167 1.5
ESPM100C 105 62 380 3
ESPM125C 130 80 639 5.7
ESPM150C 155 80 1030 8

Eclipse Worldwide


world map
Distributors

Download PDFs

Ultralift Lifting Magnets


Ultralift lifting magnet
The quick, safe and easy way to lift ferrous materials and workpieces.
Lifting magnets

Material Handling


PSPM in action Which magnetic handling product is the right one for your application? more...

Brochure PDFs


Catalogue cover Company literature available as PDFs including the Product Catalogue, Micromag and Ultralift+
Downloads page
Not quite the product you are after?

Although we manufacture and supply a large range of standard products much of our business involves supplying custom engineered products.

We work with our customers to design products and applications that satisfy their particular needs.

And, because we've got years of experience working this way, our prices are lower and turnaround times faster than you might expect.

Call us now for a no obligation discussion:

+44(0) 114 225 0600