Product Categories

Power Matrix
PRODUCTIMAGE:
The Ultimate Milling Chuck
Increased productivity
- Clamp at the push of a button
- No manual clamps – non-stop machining
- 5 face accesibility
Safer Workholding
- Consistent extreme clamping force
- Failsafe – load stays held if power lost
Higher Quality
- Minimal vibration – improved part finish & longer tool life
- No heat distortion – chuck does not heat up
More...

Alnico deep pots

printable page

Alcomax III pot magnets with a maximum operating temperature of 220 degrees C. Some have a central tapped screw thread.

Tell me more about pot magnets, alnico

PRODUCT RANGE

Product	Diameter (mm)	Height (mm)	Maximum Pull	Thread Size	Weight (kg)	Finish, Surface Finish	Keepered
829	9.5	15.1	1	M3	0.005	Sprayed Red
830	12.7	15.9	2	M4	0.015	Sprayed Red
831	17.5	16	2.65	M6	0.023	Sprayed Red
832	20.5	19	4	M6	0.040	Sprayed Red
833	27	25	6.1	M6	0.085	Sprayed Red
834	35	30	14.75	M6	0.184	Sprayed Red
E535	6.35	12.7	0.127	n/a	0.002	insulated with brass ring	No
E536	12.7	12.7	.204	n/a	0.002	insulated with brass ring	No
E640	6.35	12.7	0.113	n/a	0.001	Mild steel pot	Yes
E641	6.35	25.4	0.227	n/a	0.001	Mild steel pot	Yes
E642	12.7	12.7	1.02	n/a	0.02	Mild steel pot	Yes
E643	12.7	19.05	0.68	n/a	0.003	Mild steel pot	Yes
E644	12.7	25.4	1.587	n/a	0.005	Mild steel pot	Yes
E649	25.4	38.1	7.938	n/a	0.027	Mild steel pot	Yes
E730	6	10	2	n/a	0.002	Mild steel pot	-
E731	8	12	4	n/a	0.004	Mild steel pot
E732	10	16	9	n/a	0.009	Mild steel pot
E733	13	18	17	n/a	0.017	Mild steel pot
E734	16	20	29	n/a	0.029	Mild steel pot
E735	20	25	57	n/a	0.057	Mild steel pot
E736	25	30	110	n/a	0.11	Mild steel pot
E737	32	35	200	n/a	0.2	Mild steel pot
E738	40	45	420	n/a	0.42	Mild steel pot
E739	50	50	720	n/a	0.75	Mild steel pot
E740	6	20	0.2	M3	0.003	Mild steel pot
E741	8	20	0.4	M3	0.006	Mild steel pot
E742	10	20	0.9	M4	0.01	Mild steel pot
E743	13	20	1.2	M4	0.012	Mild steel pot
E744	16	20	2.0	M4	0.025	Mild steel pot
E745	20	24	7.5	M4	0.055	Mild steel pot
E746	25	35	11.5	M6	0.135	Mild steel pot
E747	32	40	20.0	M8		Mild steel pot
E748	45	44	36.0	M10		Mild steel pot
E790	6	20	0.2	n/a	0.004	Mild steel with zinc coating
E791	8	20	0.3	n/a	0.007	Mild steel with zinc coating
E792	10	20	0.5	n/a	0.011	Mild steel with zinc coating
E793	13	20	1.0	n/a	0.019	Mild steel with zinc coating
E794	16	20	1.5	n/a	0.029	Mild steel with zinc coating
E795	20	25	3.5	n/a	0.057	Mild steel with zinc coating
E796	25	35	8.0	n/a	0.14	Mild steel with zinc coating
M5663ANK	12.7	15.9	2.65	M6	0.023	Natural	Yes
M5663ANR	12.7	15.9	2.65	M6	0.023	Natural	No
M5663ASK	12.7	15.9	2.65	M6	0.023	Sprayed Red	Yes
M5663ASR	12.7	15.9	2.65	M6	0.023	Sprayed Red	No
M5663BNK	20.5	19	4	M6	0.04	Natural	Yes
M5663BNR	20.5	19	4	M6	0.04	Natural	No
M5663BSK	20.5	19	4	M6	0.04	Sprayed Red	Yes
M5663BSR	20.5	19	4	M6	0.04	Sprayed Red	No
M5663CNK	27	25	6.1	M6	0.085	Natural	Yes
M5663CNR	27	25	6.1	M6	0.085	Natural	No
M5663CSK	27	25	6.1	M6	0.085	Sprayed Red	Yes
M5663CSR	27	25	6.1	M6	0.085	Sprayed Red	No
M5663DNK	35	30	14.75	M6	0.184	Natural	Yes
M5663DNR	35	30	14.75	M6	0.184	Natural	No
M5663DSK	35	30	14.75	M6	0.184	Sprayed Red	Yes
M5663DSR	35	30	14.75	M6	0.184	Sprayed Red	No
M5663YNK	9.5	15.1	1	M3	0.007	Natural	Yes
M5663YNR	9.5	15.1	1	M3	0.007	Natural	No
M5663YSK	9.5	15.1	1	M3	0.007	Sprayed Red	Yes
M5663YSR	9.5	15.1	1	M3	0.007	Sprayed Red	No
M5663ZNK	12.7	15.9	2	M4	0.013	Natural	Yes
M5663ZNR	12.7	15.9	2	M4	0.013	Natural	No
M5663ZSK	12.7	15.9	2	M4	0.013	Sprayed Red	Yes
M5663ZSR	12.7	15.9	2	M4	0.013	Sprayed Red	No
M5991/ISR		25	12	M6	0.24	Sprayed Red	No