Electro-holding Magnets
printable page
Energise to hold magnets
Energise to release magnets
Buy electro-holding magnets online
Download electro-holding magnets PDF
(includes dimensions, pull strengths over different air gaps data)
Ideal for use in:
- Machine tools
- Door locking / holding
- Feeder mechanisms
- Short stroke / high force operations
- Textile machinery
- Automation
- Office machines
- Grill locking
- Packaging machinery
- Remote hold / release
| Operating voltage | 12, 24VDC & 214VDC (240VAC Rectified plug connector) |
| Connector options | free leads, two-pole connector, Hirschman connector |
| Mountings | Threaded hole/s in rear face of magnet |
| Finish | Bright nickel plated with machined face |
| Holding Force | Up to 1677N |
- Sturdy bright nickel plated cylinder, passivated with body mounting
- High-quality permeable iron for low remanence
- Armature plates to suit
Energise to hold magnets
Electrical current is required to turn the magnet ON. Power is removed to turn the magnet OFF
Pull strength with an air gap 0mm
| Product diameter | 25 | 30 | 40 | 50 | 65 |
| Magnetic pull (kg) | 11.3 | 25.3 | 57.5 | 109.7 | 167.7 |
Download the electro-holding magnet energise to hold datasheets (pdf)
25mm diameter
30mm diameter
40mm diameter
50mm diameter
65mm diameter
Energise to release magnets
Electrical power is required to the turn the magnet OFF. Power is removed to restore the magnet to ON.
Not available as 12V.
Pull strength with an air gap 0mm
| Product diameter | 35 | 50 |
| Magnetic pull (kg) | 28.5 | 47.1 |
Download the electro-holding magnet energise to release datasheets (pdf)