Separation
printable page
Magnetic separators are used in almost every processing industry to remove ferrous and para-magnetic* contamination from products and production lines. Contamination can enter your production line in your raw materials, staples and nails from packaging, nuts and bolts vibrating loose from machinery, wear and tear of moving parts and rust. Not only can this contamination enter your products it can also cause production line stoppages and serious damage to your machinery. Eclipse Magnetics produce high-quality high-power separators for most applications in a vast range of industries including pharmaceutics and food. *Non-magnetic material that can take on some magnetic properties 
Conveyor head roller
 Installed at discharge end of flat or trough belt conveyors to remove tramp and small pieces of iron that cannot be extracted by plate or overband magnets because of product depth.
 Removes tramp iron from gravity fed pipelines and chutes. Installed at goods inwards points or mid-process. Allows established flow rates to be maintained.
 Positioned over conveyors to prevent tramp iron entering crushers, screens and other machinery. Deep magnetic flux fields reach into product to remove contamination. Can be used in harsh environments.
Double row easy clean grid
 Increased efficency, longer operating period than single row. Removes ferrous and para-magnetic contamination from dry free-flowing products: sugar, grain, flour, powders. Units available for chutes and pipelines.
 Extremely efficent removal of fine iron from free flowing powders & granulates. Easily placed into hoppers, intake & outlet points.
 Mounted above flat belt conveyors to remove ferrous contamination from many product types.
 Prevents tramp iron from damaging process machinery. Installed in blown or gravity fed pipelines, usually at intake points and primary stages of the process line.
Housed separating drum
 Installed in chutes for continuous removal of tramp and fine ferrous contamination from dry bulk materials in the grain, chemical and mineral industries and recycling.
 Removal of micron sized ferrous and para-magnetic contamination from various types of liquids. Double wall jacketed version for temperature critical applications e.g. chocolate.
 Installed above flat or trough conveyors for removal of tramp in recycling, quarrying and heavy industries. Particularly suitable for heavily contaminated products. Removed contamination is continaully deposited in a collection bin.
 High intensity magnetic separator designed to remove ferrous and stainless steel scrapings from pneumatic conveying lines operating at up to 25m/s.
 Extremely efficent at removing fine iron contamination from free flowing products e.g. sugar, grain, granulate & other powders with low moisture content. Ideal for engineers building their own separators or where there isn't enough room for a conventional unit.
 Mainly used to extract contamination from product that is prone to caking or bridging (e.g. starches, powders with high moisture content) but can be used to provide improved separation on other products. Housings available for chutes and pipelines.
 Quality control inspection of products for ferrous and lightly magnetic contamination.
 Continuous removal of tramp and finer ferrous contamination from dry bulk materials in grain, chemical and mineral processing, and recycling. Fitted at conveyor discharge or below vibratory feed system.
Single row easy clean grid
 Removal of fine and para-magnetic contamination from dry free flowing products (e.g. sugar, grain, granulates, powders)
 Placed above conveyors, side of chute work, product outlets. Stainless steel shroud means can be used in wet applications.
 Positioned on the underside of angled chutes to prevent large pieces of ferrous contamination being introduced into process machinery.
|