Product Categories

Power Matrix
PRODUCTIMAGE:
The Ultimate Milling Chuck
Increased productivity
- Clamp at the push of a button
- No manual clamps – non-stop machining
- 5 face accesibility
Safer Workholding
- Consistent extreme clamping force
- Failsafe – load stays held if power lost
Higher Quality
- Minimal vibration – improved part finish & longer tool life
- No heat distortion – chuck does not heat up
More...

HPC600/P Pneumatically Switchable Magnet

This pneumatically switched magnet provides the sort of extremely high clamping force usually found on electrically operated magnets (max 200kg SWL). It's specifically designed for intimate contact with the load.

Custom options

One magnet can be used for many applications with interchangeable pole shoes, profiled to suit your products, and attached as required. Replaceable wear plates are also available but otherwise the magnet is virtually maintenance free. The load is not damaged by the magnet.

Lift in safety

The magnet material inside the unit is permanently magnetic. Air is only required to turn the unit itself on and off and does not affect the magnet material. This means if the unit is holding a load and the air supply fails, the load remains held.

Hand ratchet switched version available.

Technical Data



Sales Info
Unit of Pack:	1

Dimensions
Length:	235 mm (9.25 ")
Width:	98 mm (3.86 ")
Thickness / Height:	103 mm (4.06 ")
Weight:	7 kg (15.43 lb)

Holes
No. Fixing Holes:	4
Thread Size:	M6
Fixing Holes A pitch:	50 mm (1.97 ")
Fixing Holes B pitch:	120 mm (4.72 ")
Fixing Details:	Threadded Hole
Fixing Holes Thread Size:	M6

Poles
Number of Poles:	5
Pole Width:	20 mm (0.79 ")
Pole Pitch:	30 mm (1.18 ")
Pole Extensions Length:	74 mm (2.91 ")
Pole Extensions Width:	20 mm (0.79 ")
Pole Extensions Height:	16 mm (0.63 ")
Pole Configuration:	Linear

Magnetism
Maximum Pull:	650 kg (1,432.99 lb)

Finish
Finish, Surface Finish:	Epoxy Powder Paint (red)
Front / Working Face:	Ground/ Steel

Operating Data
Maximum Operating Temperature:	80 °C (176.00 °F)
Operating Pressure:	6 - 10 actuation
Max Operating Pressure:	10 Bar (145.03 PSI)
Minimum Thickness:	10 mm (0.39 ")
SWL (flat section):	200 kg (440.92 lb)

Electrics / Control
Compliance:	Optional

In / Out / Through
Air Inlet:	1/8 BSP
Recommended Pipe Diameter:	6mm min
Inlet & Outlet Type:	BSP Thread
Inlet & Outlet Size:	3/8 BSP
Inlet & Outlet Size ("):	3/8"""" BSP
Inlet & Outlet Size:	3/8 BSP

Misc. / Additional
Air Usage:	75 cc (4.58 in³)